![background image](http://html1.mh-extra.com/html/cc-isobus/cci-50/cci-50_operating-instructions-manual_2575720180.webp)
CCI.Control
CCI.Control
–
Operation
91
4.7.1
Activate/deactivate Auto-logging
Auto-logging is used to automatically and permanently document task data. This
guarantees documentation even if the driver has not created or started any task
himself.
Auto-logging documents all the work carried out in one day in a task. These task
data can be calculated and evaluated at a PC if an FMIS is used that is capable of
assigning data to individual tasks.
To activate/deactivate the auto-logging function, proceed as follows:
1.
Press the “Auto-Logging” button on the touchscreen or turn the scroll wheel
until this button is highlighted in white and then press the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the Boolean value.
3. Confirm your entry with "OK".
Note
If a task is started while the auto-logging function is activated, automatic
documenting is paused. If this task is stopped, automatic recording is started
again.
Note
The task data documented via the auto-logging function must be exported (see
Section 4.6). Tasks that are older than 7 days are automatically deleted.
4.7.2
Activate/deactivate Notifications
If the terminal is switched off during an active task, an audible signal can sound in
addition to a warning message being issued when the terminal is switched back
on.
Notifications can be displayed if a reason for the pausing of a task needs to be
entered or a field is reached or left.
To activate or deactivate notifications and signals, proceed as follows:
1. Press the button on the touchscreen with the required display or turn the scroll
wheel until the button is highlighted in white and then press the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the Boolean value.
3. Confirm your entry with "OK".
Содержание CCI 50
