CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 322 / 359

CCI.Command
– Troubleshooting
79
5.2 Errors during operation
The following overview shows you possible errors when operating with
CCI.Command , their possible cause and how to rectify them:
Error Possible cause Rectification/approach
Calculation of the field
boundary takes a long time Large distance between the
blue highlighted areas,
because:

the implement was switched
on briefly before the
passage to the
field

Data from a second, not yet
removed
field has not yet
been stored or deleted.
Go to Settings, select the Fields
tab, delete the field data (see
4.3.2.7) and re-process the
field .
Depiction of the field in the
Fields tab is very small and
not centralised.
Alongside the working of the
field , the implement was briefly
switched on at another point.
Delete field data (see 4.3.2.7)
and re-work the
field .
The current lead track is not
highlighted blue.
No sections are currently
switched on for the implement. If no sections are switched on,
the track that was last used for
working is highlighted in blue.
This is to aid better re-finding of
this track, e.g. after filling of the
implement.
Reference tracks , field
boundaries, and worked area
are displaced.
GPS drift Calibrate reference point and/or
reference track (see chapters
4.4.4.1 and 4.4.4.3)
No GPS signal

Not receiving

Check power supply

Check whether the receiver
is connected to the RS233-
1
interface and this is
selected

Check whether the baud
rate set at the receiver and
the
terminal agree.

Not all necessary message
signals are received.

Change the receiver
settings, consult the
receiver operating
instructions for this purpose.