CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 79 / 359

CCI.Cam
CCI.Cam
– Operation
16
4.4.1.1 Assigning the function keys
To assign a function key to a camera, proceed as follows:
1. Press on one of the "Camera 1-8" buttons on the touchscreen or turn the scroll
wheel until the button in question is highlighted in white and then press on the
scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
→ A list of available function keys opens.
2. Select a function key from the list. To do so, in the touchscreeen press the
button with the number of the function key.
3. Confirm your selection with "OK" or press on the button with the function key
number again.
Note
It is recommended that the two most important cameras are assigned to function
keys 1 and 2. You can always access the images of these two cameras directly in
the main view.
Note
Function keys 3, 4 and 5 (F3, F4, F5) can each be allocated to two cameras in
CCI.Cam . Therefore when allocating cameras to function keys not only are
function keys 1, 2, 3, 4 and 5 available for selection but also function keys 3 (2), 4
(2) and 5 (2). To be able to access these other cameras via the function keys in
the main view, press the button "Show other cameras" (F6) (see chapter 0).