CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 78 / 359

CCI.Cam
CCI.Cam
– Operation
15
4.4.1 Assignment
This submenu facilitates the flexible assignment of cameras to the function keys
independently of the connection assignment on the
multiplexer . This makes it
possible to set the two most important cameras to the function keys "Function key
1" and "Function key 2" which are always displayed without having to modify the
connection on the
multiplexer .
Note
If you are using a multiplexer , an assignment of cameras to function keys is
essential to make it possible to activate the camera images for the automatic
camera change (see chapter 4.4.2.1).
To change the function key assignments proceed as follows:
1. Press on the "Assignment" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
→ The following screen opens:
You have the following operating options:
Assigning the function keys