Bio-Tek ELx405, Руководство оператора

Страница: 19 / 250

Revision History
|
xvii
Revision History, Cont’d
Rev Date Changes
H 7/04 • Edited Chemical Compatibility caution in Preface and Components and
Materials Composition table in Appendix C concerning use of acetic acid.
• Replaced section in Chapter 1 on Depot Service Contracts with reference to
the Bio-Tek website, where this information may be found.
• Revised Maintenance chapter with updated cleaning procedure for removal
of Bovine Serum Albumin (BSA) residue from washer.
• Updated ELx405 product name to reflect latest product name configuration.
I 1/05 • Added text throughout manual about new models:
− HT2/HTV2 (HT models with the accessory 96-tube dual manifold)
− Ultrasonic Advantage™ (ELx405, Select, Select CW, or HT models
equipped with the ultrasonic cleaner)
• Updated accessories and specs in Chapter 1, Introduction.
• Revised artwork in Chapter 2, Installation, Chapter 3, Operation, and
Chapter 4, Preventive Maintenance.
• Revised instructions in Chapter 3 for the following:
− Clarified use of the Select CW Dispense Flow Rates 10 and 11 (not
recommended for 384-well plates).
− Revised description of rapid Aspirate Rates 7 to 10.
− Added more information about Magna soak/shake options.
− Recommended a range of 12-175 (current range is 12-180) in Dispense
Height, Bottom Dispense Height, Aspirate Height, Crosswise Aspirate
Height, Plate Clearance Height sections.
− Revised sections on recommended Prime and Low Flow Prime Volumes
for the Select CW models.
• Updated Chapter 4, and Chapter 5, Performance Verification/Qualification
Tests with revisions from latest ELx405 IQ-OQ-PQ procedures.
• Enhanced Appendix B, Error Codes with descriptions of the codes and new
AUTOCLEAN codes.
• Added new Appendix E, Changing the Manifolds (for HT2/HTV2 models).
ELx405 Operator's Guide