Bio-Tek ELx405, Руководство оператора

Страница: 104 / 250

74
| Chapter 3: Operation
Define Prime Program
To define a Prime program, follow the menu path shown below. Some of these
items are options and some are prompts. The options are described in the table
below:
DEFINE SELECT ACTION CREATE SELECT PROGRAM TYPE
PRIME SELECT REAGENT BOTTLE NAME PRIME VOLUME
LOW FLOW PRIME VOLUME PRIME FLOW RATE
SOAK AFTER PRIME? SOAK DURATION OK TO SAVE PROGRAM?
The following options appear only on the specified models:
•
SELECT REAGENT BOTTLE:
Washers equipped with the external valve
module (excludes earlier models of the Select CW).
•
LOW FLOW PRIME VOLUME: Select CW model.
Define Prime Program Options
Option & Description Models Action/Comments
Select Reagent Bottle
Select the supply source
for this program.
All
Select bottle A , B , C or D .
Only appears if the washer is equipped
with the external valve module.
Name
Enter a unique name for
the Prime program.
All Use up to 16 alphanumeric characters.
See
Entering Program Names on page
44 for instructions.
Prime Volume
The volume of the buffer
or rinse used to prime the
dispense.
All The volume range is 1 to 999 ml.
(See Recommended Prime and Low
Flow Prime Volumes on page 76.)
Low Flow Prime Volume
Only appears on the
Select CW model, which
is equipped with
additional, low flow
tubing.
Select CW Specify the volume, in milliliters, of the
solution used to prime the dispense tubes.
The volume range is from 1 to 999 ml.
Note: The program uses flow rate 10
(not editable by the user).
Bio-Tek Instruments, Inc.