manualshive.com logo in svg

BeaconMedaes MedPlus TotalAlert, Эксплуатация и обслуживание

Поделиться
Скачать
BeaconMedaes MedPlus TotalAlert Скачать руководство пользователя страница 53

Page 1-40

MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)

Detailed Component Descriptions
Chapter 1: Introduction

NOTE:
Adapters are needed for the following gas types: vacuum, helium, nitrogen, waste
anesthetic gas disposal (WAGD), carbon dioxide, and carbon dioxide/oxygen
mixture.

The local-mount transducer can 

only

be used with the MedPlus TotalAlert®

Alarm Network Conversion Kits (see table 1-16 on page 1–43).

WARNING:

Do not remove the threaded insert from the transducer. Doing so may
result in attaching the transducer to the incorrect gas or vacuum type,
endangering patient welfare.

Never remove the threaded insert (DW) from the transducer; it is not a servicea-
ble component. If the transducer (DT) needs serviced or calibrated, send both the
transducer and the threaded insert (DX) back to the factory.

Содержание MedPlus TotalAlert

























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды