BeaconMedaes MedPlus TotalAlert, Эксплуатация и обслуживание

Страница: 148 / 376

WARNING:
Before making or breaking any gas or vacuum line connections, ensure
that the system is not pressurized to avoid possible injury.
WARNING:
The demand valves all fit into 1/4" tee ports. Ensure that the transducer
and demand valve assembly you install is for the type of gas or vacuum
in the line you are currently connecting. If the incorrect transducer is
installed, patient welfare may be compromised.
WARNING:
Ensure that the correct type of transducer and DISS demand flow valve is
installed for the type of gas or vacuum being monitored. If incorrect com-
ponents are installed, patient welfare may be at risk.
SHOCK HAZARD:
Turn off the power supply in the alarm, and leave it off during the installa-
tion of any component or sub-assembly. Failure to do so could result in
personal injury or equipment damage.
SHOCK HAZARD:
Turn off the source power to the alarm, and leave it off during the installa-
tion of any component or sub-assembly. Failure to do so could result in
personal injury or equipment damage.
SHOCK HAZARD:
The potential for electric shock exists with electrical equipment. Establish
policies and procedures to educate your staff on the risks associated with
electrical equipment.
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728) Page 1-135
Safety Tips
Chapter 1: Introduction
1