BeaconMedaes MedPlus TotalAlert, Эксплуатация и обслуживание

Страница: 151 / 376

Page 1-138 MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
Safety Tips
Chapter 1: Introduction
CAUTION:
Have the facility’s Information Systems personnel set up the Internet inter-
face. If the set up is done improperly, equipment may not perform proper-
ly.
CAUTION:
Do not overtighten diameter index safety system (DISS) fittings.
Equipment damage or inadequate flow could occur.
CAUTION:
Do not overtighten fittings. Equipment damage or inadequate flow could
occur.
CAUTION:
Replace the fuse with the same type and rating. If the wrong fuse is
installed, equipment may be damaged.
CAUTION:
If you do not clear the alarm network after removing or exchanging
devices, the missing device will display as a lost communication error.
CAUTION:
Assign a Gas Type to all of the connected inputs. If there is an input sig-
nal wired to the Master Alarm that has not been assigned, the display
shows: Input # - Message Not Assigned.
CAUTION:
The default command sets the Area Alarm Module back to the factory
defaults. If you do not want the factory default values, choose no.
Otherwise, the alarm may not operate as intended.