BeaconMedaes MedPlus TotalAlert, Эксплуатация и обслуживание

Страница: 351 / 376

Page 6-20 MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
Setting up the Internet Interface
Chapter 6: General Procedures
NULL Modem Driver Setup Instructions for Windows® Operating
System
If using an RS-232 serial port, you have to set up a NULL modem driver that
allows your computer access to the alarm’s Web pages without having a real
modem connected.
To set up the NULL modem driver, do the following:
1. Click on
Start .
2. Go to Settings .
3. Click on Control Panel .
4. Double click on Modems .
5. Click on Add , unless you don’t have any existing modems; then check the
“ Don’t detect my modem; I will select it from a list .”
6. Click on Other .
7. Click on Next .
8. Check the Don\qt detect my modem box.
9. Click on Next .
10. Click on Have Disk ....
11. Locate the file Mdmcisc2.inf.
12. Click on Next .
13. Select Generic NULL Modem from the list.
14. Select the serial port on your computer that you want to use.
15. Click on Next .
16. Click on Finish .