BeaconMedaes MedPlus TotalAlert, Эксплуатация и обслуживание

Страница: 123 / 376

Page 1-110 MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
Area Alarm Labeling
Chapter 1: Introduction
3. Turn the power switch (CJ) to the OFF position.
4. Using an 11/32" nut driver, loosen the two nuts (CK) that secure each of the
label holders (CG) to the mounting studs (CH).
5. Using a word processing program, print the Avery® labels (Avery® part
number 8167) with the proper text.
6. For more information about Avery® labels, go to their Website at
http://www.Avery.com.
NOTE:
Most word processors have settings for Avery® labels.
7. For general printing tips, refer to the following:
a. Before printing a label sheet, print a blank piece of paper.
b. Place the printed piece of paper over the blank label sheet to make sure
the alignment is correct.
c. Fan the label sheets before putting them into the printer, being careful not
to bend or fold the corners.
d. Refer to your printer manual for loading and feeding recommendations.
8. To print a sheet of Avery® 8167 labels with Microsoft® Word 97, do the fol-
lowing:
a. Click on the Tools menu.
b. Click on the Envelopes and Labels menu.
c. Click on the Options menu.
d. Click on
Avery standard
in the Label products menu window.
e. Click on
8167 - Return Address
in the Product number menu window.
f. Click on
OK
.
g. Click on
Full page of the same label
in the Print window.
h. Click on the
New Document
button.
i. Type the text that you need in each window of the label document.
j. Highlight the entire label sheet.
k. Center align and
bold
the text.
l. Load the label sheet into your printer.
m. Click on the icon that looks like a printer.
9. Stick the appropriate Avery® labels to the front side of the label holder (CG).
10. Place the label holders (CG) back onto the mounting studs (CH).