BeaconMedaes MedPlus TotalAlert, Эксплуатация и обслуживание

Страница: 38 / 376

By using the Web pages, you can configure or browse the following options
refer to table 1-2 on page 1-25 and table 1-3 on page 1-26).
Table 1-2. Configuring Options Available for the Master Alarm by Using the
Web Pages
A Combination Alarm that has a 30-Point Master Alarm with three Area Alarm Modules cannot
interface with a building automation system. The Area Alarm Modules use the same connector that
would otherwise interface with the building automation system.
Option Description
User administrators Sets up to three users.
User language Sets the language for English, Spanish, or French.
Set clock Sets the real time clock.
Device name Sets a unique name for the Master Alarm.
Gas or vacuum type Sets the type of gas or vacuum an input is monitoring.
Alarm message Sets an alarm input message.
Alarm system Sets the system number of the source.
LED mapping Sets the source input to an LED on the front panel.
Location Sets the location of the room where the alarm is located.
Direction Sets the direction of the wing where the alarm is located.
Alarm return time Sets the time between audible alarms.
Electronic notification
Sets up to five electronic notifications (combination of elec-
tronic mail and pager addresses).
Configuration transfer Transfers the configuration of one Master Alarm to another.
Download event log Downloads the event log to a computer file.
Download configura-
tion Downloads the Master Alarm’s configuration to a computer
file.
Clear network memory Clears the device list from the Master Alarm’s memory.
Network setup Sets the Ethernet network settings.
N2 address
Sets the address for the building automation system’s notifica-
tion option.
Software update Programs the Master Alarm’s FLASH software.
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728) Page 1-25
Detailed Component Descriptions
Chapter 1: Introduction
1