Basler BE1-BPR, Инструкция по эксплуатации

Страница: 55 / 148

4-12 BE1-BPR Functional Description
Table 4-1. Password Write Access Areas
NA = Not applicable
L
= Enhanced units only HMI Menu Branch
Access
Area Command Function
Standard
Models
Enhanced
Models
0 DATE Set clock date 5 6
0 DIAG Reset alarms 2 2
0 FLOG Reset fault log
L
NA 5
0 RESET Reset targets or reset other logs if specified 0 0
0 TIME Set time clock 5 6
0 TRIGGER Trigger oscillography record
L
NA NA
1 CAL Calibrate relay 5 6
1 FREQ Set the nominal system frequency 5 6
1 ID Set the multi-drop communications address NA NA
1 LF Set fault detector function block logic NA NA
1 LI Set input conditioning logic NA NA
1 LN Set user programmable logic name NA NA
1 LO Set output logic expressions NA NA
1 LOGIC Set which logic scheme is active NA NA
1 LR Set recloser function block logic NA NA
1 LT Set timer function block logic NA NA
1 PW Set password security 5 6
1, 2 PTARGET Set targeting function NA NA
1, 2 PU Set fault detector pickups 1 1
1, 2 TD Set timer delays 1 1
1, 2 TD79 Set recloser time delays 1 1
1, 3 BKRCON Set up breaker contact duty monitoring
L
NA NA
1, 3 BKROPS Set up breaker operations monitoring NA NA
1, 3 BKRRES Set up breaker resistor monitoring NA NA
1, 3 DLOG Reset breaker contact duty registers
L
NA 3
1, 2, 3 COM Set up communications 5 6
1, 2, 3 CT Set CT ratios NA NA
1, 2, 3 PCLK Set clock display format NA NA
1, 2, 3 PDIAG Set alarm diagnostics NA NA
1, 2, 3 PDISPLAY Set default HMI display NA NA
1, 2, 3 PHOLD Set output hold timers NA NA
1, 2, 3 PTLOG Set timer log operation NA NA
1, 2, 3 SNAME Set substation and circuit name for
COMTRADE reports
L
NA NA
1, 4 OUT Override output logic and pulse output
contacts NA NA