manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 67

3-17

Chapter 3.  Wiring

z

„

Inserting or removing a microSD memory card

Insert the microSD memory card all the way inside. Pushing on the memory card 

lightly will enable you to remove the card.

 Handling Precautions

• 

Do not insert or remove a memory card while the indicator next to the 
connector is flashing.

• 

Insertion and removal of a microSD memory card is hazardous as there is a 
power input terminal nearby. Be sure to turn off the power before inserting or 
removing this card.

• 

Insert a microSD memory card at a right angle to the main unit.  
If the card is tilted, it may not be possible to insert it.

• 

To transfer the data from a microSD memory card to the personal computer, 
use a commercially available adapter or reader/writer.

Incorrect

z

„

Connecting the LAN cable for Ethernet

Use a Cat5E or higher LAN cable to make the connection.

LAN cable

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды