1-12
Chapter 1. Overview
z
Parameter bank
The order of the parameter banks and parameter items is shown by the tree
structure below.
Parameter bank
Parameter item
SP
SP values of LSP1 to LSP8, RSP for loops 1 to 4
PID group number of LSP1 to LSP8, RSP for loops 1 to 4
EVENT
Main setting for event groups 1 to 16
Sub-setting for event groups 1 to 16
Hysteresis for event groups 1 to 16
ON-delay time for event groups 1 to 16
OFF-delay time for event groups 1 to 16
PID
P (Proportional band) of PID groups 1 to 8 for loops 1 to 4
I (Integral time) of PID groups 1 to 8 for loops 1 to 4
D (Derivative time) of PID groups 1 to 8 for loops 1 to 4
RE (Manual reset) of PID groups 1 to 8 for loops 1 to 4
OL (MV low limit) of PID groups 1 to 8 for loops 1 to 4
OH (MV high limit) of PID groups 1 to 8 for loops 1 to 4
Cooling-use proportional band of PID groups 1 to 8 for
loops 1 to 4
Cooling-use cumulative time of PID groups 1 to 8 for loops
1 to 4
Cooling-use derivative time of PID groups 1 to 8 for loops 1 to 4
Cooling-use MV low limit of PID groups 1 to 8 for loops 1 to 4
Cooling-use MV high limit of PID groups 1 to 8 for loops 1 to 4
ANALOG INPUT
Range type of blocks A4, B4, A3, and B3
Linear scaling low limit of blocks A4, B4, A3, and B3
Linear scaling high limit of blocks A4, B4, A3, and B3
Filter of blocks A4, B4, A3, and B3
Ratio of blocks A4, B4, A3, and B3
Bias of blocks A4, B4, A3, and B3
Linearization table group definition of blocks A4, B4, A3, and
B3
BASIC ACTION
Sampling cycle
Power supply frequency
Time unit of patterns
HOME screen layout
Run/Ready at startup for loops 1 to 4
No. of decimal places for PV 1 to 4
Display loop for A2/B2/A1/B1 block input
HOME screen setting for loops 1 to 4
Display intensity
Display language
Engineering mode
