manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 216

5-22

Chapter 5.  Screens

z

„

Screen at key lock

(2)

(1)

(1) Key lock icon

Displayed when the key lock is ON.

(2) Menu button

Holding down this button cancels the key lock status, allowing you to perform 

the button operation.

 Handling Precautions

• 

The parameter bank menu screen cannot be displayed in the key lock status.

• 

Even in the key lock status, you can change the display on the monitor screen, 
switch between the monitor and graph screens, and display the DI/DO 
monitor and alarm screens.

• 

Even if a screen other than the Home screen is displayed when the keys are 
locked, the display will revert to the Home screen if the power is turned off 
and then turned on again or if the the display unit cable is disconnected and 
reconnected.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды