manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 48

2-6

Chapter 2.  Mounting

(3)  Working from the front of the control panel, pass the integrating cable and the 

upper part of the integrating bracket through the cutout in the panel.

 

(4)  Raise the display unit, pass the bottom part of the integrating bracket through 

the cutout in the panel, and hang it on the connecting part of the setscrews.

 

(5)  Working from the back of the panel, attach the display unit to the integrating 

bracket with the four display unit mounting screws. (Tightening torque: 

0.6 N·m)

 

(6)  Attach the integrating bracket to the control panel with the control panel 

mounting screws.  

(Tightening torque: 0.25 N·m*)

*   After the display unit no longer moves freely, turn the screws on and a half more 

full turns.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды