manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 210

5-16

Chapter 5.  Screens

(7) PV No. buttons

Displays the PV graph color of each loop. Touching this button displays the 

1-loop graph screen for the PV No. that was touched.

(8) Change button

Pressing this button displays the 1-loop graph screen for LOOP1.

(9) Home button

Pressing this button displays the Home screen.

Other displays and buttons conform to the Home screen.

 Handling Precautions

• 

This product does not store the graph display data. When the power is turned 
off, the display contents are cleared. After the power has been turned on 
again, the product starts drawing the graph from the left end.

• 

When using this product with the 1 loop setting, the multi-loop graph screen 
cannot be displayed.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды