manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 231

5-37

Chapter 5.  Screens

z

„

G.SOAK clear screen

(3)

(1)

(2)

(4)

(1) 

[CANCEL]

 button

Touching this button returns the display to the monitor screen without clearing 

G.SOAK wait.

(2) 

[CLEAR]

 button

Touching this button clears G.SOAK wait and returns the display to the monitor 

screen.

(3) Home button

Pressing this button displays the Home screen.

(4) Menu button

Pressing this button displays the parameter bank menu screen.

 Handling Precautions

• 

If pattern operation is disabled, the G.SOAK clear screen is not displayed.

• 

If the version of the MAIN block firmware is earlier than 6.x.x (where x stands 
for any number), the pattern operation function is not available.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды