manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 180

4-110

Chapter 4.  Functions

• 

If the power is turned OFF while the CDS function is operating, or if data is 
written until the microSD memory card is full, a file will be created without 
updating the data in the context section and without writing "SectionEnd" in 
the time sequence section.

• 

If data is written until the microSD memory card is full, the last section of 
the data may be lost or an error may result. As long as the time stamps are 
arranged correctly in the time sequence data section, this section is recorded 
correctly.

• 

When the microSD memory card capacity is full, an alarm will be generated. 
Delete unneeded files on the microSD memory card as appropriate. File 
operations cannot be done from the display unit of this device. Either perform 
file operations using the SLP-C7 Smart Loader Package, or remove the 
microSD memory card and use a PC to delete data.

• 

If an alarm occurs, the data has not been saved correctly, and is corrupted.

• 

Do not format the microSD memory card.

 Note

• 

 Chapter 11.  Maintenance and Troubleshooting and 

Block alarm screen (p. 11-2)

• 

This device does not specify time with the accuracy required for use as a data 
logger.

• 

Use the microSD memory card that was included with this device.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды