manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 221

5-27

Chapter 5.  Screens

z

„

LSP/RSP select screen

The currently selected LSP or RSP is displayed in the blue frame.

(1)

(3)

(2)

(5)

(4)

(1) LSP group selection

Touch a desired LSP group to select it. The display does not return to the 

monitor screen even when this is selected.

(2) RSP selection

Touch this portion to select the RSP. The display does not return to the monitor 

screen even when this is selected.

(3) 

[Back]

 button

Touching this button returns the display to the monitor screen.

(4) Home button

Pressing this button displays the Home screen.

(5) Menu button

Pressing this button displays the parameter bank menu screen.

 Handling Precautions

• 

The number of LSP system groups displayed may vary between 1 and 8 
groups according to the setting for the number of LSP groups (in the SP 
CONFIG bank).

• 

When there is no RSP according to the model No. and loop type setting, no 
RSP is displayed.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды