manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 244

5-50

Chapter 5.  Screens

z

„

Date and Time

The setting procedure for the date and time screen is different from the regular 

procedure for screens.

The date and time each have three individual settings.

After changing the individual settings, touching 

[ENTER]

 finishes the setting change.

If 

[×]

 at the top right is touched, changes in the individual settings are not applied.

(1)

(2)

(5)

(3)

(4)

(6)

(1) Date setting

From the left, the settings for the date are displayed in the order: year, month, 

day.
Touching this displays the setting change screen for the individual setting you 

have touched.

(2) Time setting

From the left, the settings for the time are displayed in the order: hour, minute, 

second.
Touching this displays the setting change screen for the individual setting you 

have touched.

(3) Close button

Touching this button returns the display to the parameter item menu screen.
In this case, no changes are made to the date and time settings.

(4) 

[ENTER]

 button

Touching this writes the set values for the date and time and restarts updating of 

the display of the date and time.

(5) Home button

Pressing this button displays the Home screen.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды