manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 200

5-6

Chapter 5.  Screens

z

z

For 2 loops

The Home screen is a multi-loop monitor screen, separated into two loop displays 

located on the left and right sides.

Touching the display area of any loop shows the 1-loop monitor screen for that 

loop.

(4)

(3)

(1)

(10)

(7)

(6)

(5)

(2)

(9)

(8)

(1) to (2) Monitor display by loop

Displays the PV (numeric value), SP (numeric value), MV (numeric value), 

RUN/READY mode, and AUTO/MANUAL mode of loops 1 to 2.
When the AT is started, the AT progress graph is displayed. The LSP/RSP mode 

is not displayed.
When the area of any loop is touched, the display changes to the 1-loop monitor 

screen for that loop.

(3)Graph icon

Touching this icon displays the graph screen.

(4) DO display

Displays the statuses of the DO1 to 7 terminals.
A green number shows ON status, a gray number shows OFF status, and "-" 

indicates the DI function.
Touching this portion of the screen displays the DI/DO monitor screen.

(5) Alarm 1 icon

The light blue icon shows that there are no alarms.
Touching this icon displays the block alarm screen.

(6) Home button

This button is disabled on the Home screen.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды