manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 245

5-51

Chapter 5.  Screens

(6) Menu button

Pressing this button displays the parameter bank menu screen.

 Handling Precautions

• 

For models without a clock function, the date and time when the power is 
turned on is January 1, 2000 at a time of 00:00:00.

• 

For models with a clock function, the date and time are backed up by a battery 
even when the power is cut off. However, if the battery runs out of power, 
when the device is turned on, the date and time will revert to January 1, 2000 
at a time of 00:00:00.

• 

Display of the date and time are updated until the change of settings begins, 
but once the settings change process has started, updating of the date and 
time is stopped. Even though the display is not updated, the date and time 
continue to be updated.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды