manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 40

1-22

Chapter 1.  Overview

The "HOME screen layout" setting (left/right split, left/right swap, vertically 

arranged) also applies to the 2-loop screen.
The 3-loop screen is vertically arranged regardless of the "HOME screen layout" 

setting.

If the graph icon on the user HOME screen is touched, the display changes to the 

graph screen.

• 

If the user HOME screen is a multi-loop screen, the destination graph screen will 

also be a multi-loop screen.

• 

If the user HOME screen is a 1-loop screen, the destination graph screen will also 

be a 1-loop screen.

• 

If the numeric icon is touched after going from the user HOME screen to the 

graph screen by touching the graph icon, the screen will return to the HOME 

screen or the 1-loop monitor screen, but not to the user HOME screen.

 Handling Precautions

• 

If the version of the MAIN block firmware is earlier than 6.x.x (where x stands 
for any number), there is no user HOME screen.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды