10-7
Chapter 10. PLC Link Communication
z
Transfer settings
(4)
(1)
[A]
[C]
(5)
(2)
(3)
(8)
(9)
(10)
(6)
(7)
(11)
[B]
(1) Select a tab from the
[Transfer 1]
to
[Transfer 4]
tabs.
z
z
Section [A] Transfer operation settings
(2) After selecting a tab, first select
[Operation type]
.
(3) Drag and drop an address in section
[C]
to
[Trigger device / live notification
device]
,
[Completion notification bit]
, and
[Completion notification data]
.
z
z
Section [B] Transfer data settings
(4) The number of lines can be increased or decreased with
[Ins]
and
[Del]
.
One line corresponds to one item. Up to 32 items can be specified in total
for transfer 1 to transfer 4 combined.
[Remaining items]
is displayed at the
bottom of the screen.
(5) Other lines can be selected by using
[Up]
and
[Down]
.
(6) Set
[PLC Address]
and
[C7 Address]
by dragging and dropping an address in
section
[C]
.
(7) Set the number of decimal places for converting data with decimal points to
integer data for communication. For example, if 1 digit after the decimal place
is set, data with a decimal point is converted to integer data 10 times larger.
z
z
Section [C] Address list
(8) Select
[Device (PLC or C7)]
.
(9) Select
[Data type]
.
(10) Enter the first address in the list. Right-click with the mouse to increase or
decrease.
(11) An address can be selected from the list and dragged and dropped to sections
[A]
and
[B]
.
