manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 234

5-40

Chapter 5.  Screens

z

„

DO monitor screen

When using models in which the DO block is located in slot A1 or B1, the states of 

terminals 1 to 4 of the DO block can be monitored.

(4)

(2)

(3)

(1)

(5)

(1) DO terminal status

Displays the name of the slot in which the DO block is located.
If the number has a green background, the DO terminal is ON.
If the number has a gray background, the DO terminal is OFF.
If the actual terminal ON/OFF time is shorter than the display update time, the 

terminal's activity may not be reflected on the display.

(2) Screen forward and back buttons

When 

[Λ]

 is touched, the screen goes back to the previous screen, and when 

[V]

 

is touched, the screen switches to the next enabled screen among the DI/DO 

monitor, DI monitor, DO monitor, EV monitor, and SEG-EV monitor screens.

(3) Close button

Touching this button returns the display to the previous screen.

(4) Home button

Pressing this button displays the Home screen.

(5) Menu button

Pressing this button displays the parameter bank menu screen.

 Handling Precautions

• 

If the version of the MAIN block firmware is earlier than 6.x.x (where x stands 
for any number), the DO monitor screen is not displayed.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды