manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 236

5-42

Chapter 5.  Screens

z

„

SEG-EV monitor screen

The statuses of segment events 1 to 16 can be monitored.

(4)

(2)

(3)

(1)

(5)

(1) Segment event status

A number with a green background indicates a terminal whose segment event is 

ON.
A number with a gray background indicates a terminal whose segment event is 

OFF.
If the actual segment event ON/OFF time is shorter than the display update 

time, the status may not be reflected on the display.

(2) Screen forward and back buttons

When 

[Λ]

 is touched, the screen goes back to the previous screen, and when 

[V]

 

is touched, the screen switches to the next enabled screen among the DI/DO 

monitor, DI monitor, DO monitor, and EV monitor screens.

(3) Close button

Touching this button returns the display to the previous screen.

(4) Home button

Pressing this button displays the Home screen.

(5) Menu button

Pressing this button displays the parameter bank menu screen.

 Handling Precautions

• 

If pattern operation is disabled, the SEG-EV monitor screen is not displayed.

• 

If the version of the MAIN block firmware is earlier than 6.x.x (where x stands 
for any number), the SEG-EV monitor screen is not displayed.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды