manualshive.com logo in svg

Azbil C7G, Руководство по установке и настройке

Поделиться
Скачать
Azbil C7G Скачать руководство пользователя страница 225

5-31

Chapter 5.  Screens

z

„

Mode menu screen (pattern)

If pattern operation is enabled, operations related to pattern operation can be 

executed on this screen.

(5)

(6)

(4)

(1)

(2)

(3)

(7)

(1) 

[HOLD ON]

/

[HOLD OFF]

button

Touching this button displays the HOLD mode change screen.

(2) 

[ADVANCE]

 button

Touching this button displays the ADVANCE operation screen.

(3) 

[CLEAR]

 button

Touching this button displays the G.SOAK clear screen.

(4) 

[MODE]

 button

Touching this button displays the mode menu screen.

(5) Close button

Touching this button returns the display to the previous screen.

(6) Home button

Pressing this button displays the Home screen.

(7) Menu button

Pressing this button displays the parameter bank menu screen.

 Handling Precautions

• 

In the READY and END modes, the [HOLD ON]/[HOLD OFF]button display 
becomes dark and touch operation is disabled.

• 

In the READY and END modes, the [ADVANCE] button display becomes dark 
and touch operation is disabled.

• 

If the device is not in a G.SOAK wait, the [CLEAR] button display becomes dark 
and touch operation is disabled.

• 

If pattern operation is disabled, the mode menu screen (pattern) is not 
displayed.

• 

If the version of the MAIN block firmware is earlier than 6.x.x (where x stands 
for any number), the pattern operation function is not available.

Содержание C7G











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды