
Installation in OS/2
70
Controller B1 v3.0 – 11 Installation in OS/2
11 Installation in OS/2
For use in OS/2, specially developed drivers are included
with delivery. This CAPI driver also supports existing OS/2
applications based on CAPI 1.1. For more information about
CAPI, see the section “The Applications Interface CAPI 2.0”
on page 78.
11.1 Installing the Driver Software
Before beginning with the software installation, check that
the ISDN-Controller has been installed in the computer prop-
erly. Make sure that an I/O address available in the computer
is set on the ISDN-Controller (see the section “Setting the I/O
Address” on page 14).
Proceed as follows to install the driver software in OS/2:
1.
Insert the “AVM ISDN-Controller B1 v3.0” CD in your CD-
ROM drive.
2.
Open the “System” folder and double-click “Drives”.
Then click the icon for your CD-ROM drive. Switch to the
following directory:
CARDWARE\B1_v30\OS2\ENGLISH
3.
Start the program INSTALL.EXE.
4.
An OS/2 command-line window opens and the installa-
tion program’s sign-on message appears. Press “Re-
turn”.
Installation can be aborted at any time by pressing
“Ctrl+x”.
5.
The next dialog asks whether the AVM ISDN-Controller
B1 v3.0 is to be loaded automatically each time OS/2 is
started. Activate the desired option and confirm it with
“Return”.
HB_B1V30.book Seite 70 Mittwoch, 7. Februar 2001 3:19 15