
Installing the Driver Software
30
ISDN-Controller B1 v3.0 – 5 Installation in Windows Millennium
5.4 Installing the Driver Software
After physically installing the Controller B1 v3.0, the next
step is to install the driver software. Proceed as follows:
1.
Turn your computer back on. The welcome screen of the
installation program appears. To obtain more informa-
tion about the ISDN-Controller and the installation pro-
cess, click the “Read AVM Readme” button.
Use the “F1” key at any time to view a help text for the
current installation step.
Click “Next”.
2.
Select the ISDN-Controller to be installed. For informa-
tion about the controllers listed, click the “Info” button.
Click “Next”.
In the next window, enter the folder in which the driver
software of the AVM ISDN-Controller B1 v3.0 is to be in-
stalled. When your entries are complete, click “Next”.
3.
The next step is to specify the protocol of your ISDN
line.
4.
Activate the desired option and then click “Next”. The
installation program then copies all files to the speci-
fied folder.
5.
Once copying has been completed, a window display-
ing the settings of the ISDN-Controller B1 v3.0 appears.
Confirm these settings by clicking “OK”.
This concludes the installation of the driver software for the
AVM ISDN-Controller B1 v3.0 in Windows Me. The controller
is ready for immediate operation.
A new folder called “AVM” is created in the “Programs”
group of the Start menu. This folder contains the programs
“AVM Internet Home Page”, “B1 Unload”, “B1 Load”, “B1
Readme”, “B1 Setup” and “B1 Test”.
HB_B1V30.book Seite 30 Mittwoch, 7. Februar 2001 3:19 15