Installation in Windows 95
42
ISDN-Controller B1 v3.0 – 7 Installation in Windows 95
7 Installation in Windows 95
For use in Microsoft Windows 95, specially developed drivers
are included with delivery. This 32-bit device driver (VxD) of-
fers full support for all features of Microsoft Windows 95.
The CAPI 2.0 supplied with the controller supports Windows
applications and applications in DOS windows at the same
time. For more information about CAPI, see the section “The
Applications Interface CAPI 2.0” on page 78.
The AVM ISDN-Controller B1 v3.0 is installed in Windows 95
in four main steps:
1.
Installing a new hardware device using the Hardware
Wizard
2.
Configuring the controller
3.
Physically installing the controller
4.
Installing the driver software
The individual steps are described in detail below.
7.1 Installing the New Hardware Device
Do not physically install the ISDN-Controller hardware in
your computer first.
Proceed as follows for installation:
1.
Open the “Add New Hardware” folder in the Windows
95 Control Panel (“Start / Settings / Control Panel”).
2.
The Windows 95 Add New Hardware Wizard appears.
This wizard assists in the installation of new hardware
devices. Click “Next” to begin installation.
3.
In the next window, answer “No” to the questions, “Do
you want Windows to search for your new hardware?”
and click “Next” again.
HB_B1V30.book Seite 42 Mittwoch, 7. Februar 2001 3:19 15