
Starting Operation of the ISDN-Controller B1 v3.0
ISDN-Controller B1 v3.0 – 7 Installation in Windows 95
45
4.
The next step is to specify the protocol of your ISDN
line.
Activate the desired option and then click “Next”.
5.
The installation program then copies all files to the
specified folder.
6.
Once copying has been completed, a window display-
ing the settings of the ISDN-Controller B1 v3.0 appears.
Confirm these settings by clicking “OK”.
A new folder called “AVM” is created in the “Programs”
group of the Start menu. This folder contains the programs
“AVM Internet Home Page”, “B1 Unload”, “B1 Load”, “B1
Readme”, “B1 Setup” and “B1 Test”.
This concludes the installation of the driver software for the
AVM ISDN-Controller B1 v3.0 in Windows 95.
If the I/O address of the ISDN-Controller must be changed
after installation, because of a new hardware device, for in-
stance, open the Windows Me Device Manager by clicking
through “Settings / Control Panel / System”. Enter the new
value there.
After changing this setting, remove the ISDN-Controller
hardware from the computer and switch the jumper accord-
ingly. Windows 95 administers the interrupt values automat-
ically.
7.5 Starting Operation of the ISDN-
Controller B1 v3.0
By default the controller is loaded automatically every time
Windows 95 is started. Because the controller is loaded be-
fore the items in the “Startup” program group, it is no prob-
lem to include communications programs based on CAPI in
the “Startup” group.
If the ISDN-Controller B1 v3.0 is not to be loaded at all times,
use the options for manual loading and unloading.
HB_B1V30.book Seite 45 Mittwoch, 7. Februar 2001 3:19 15