Installing Additional ISDN-Controllers with the CAPI Manager
68
ISDN-Controller B1 v3.0 – 10 Installation in Novell NetWare
For more information about CAPI SoftCompression, see
the section “CAPI SoftCompression X75/V42bis” on
page 83.
10. Exit the configuration dialog by pressing “Esc” twice
and select “Yes” to confirm that you want to save the
new settings.
11.
The final step in the configuration process is to update
the system and load the ISDN-Controller.
In the “Internetworking Configuration” window, select
the “Reinitialize System” command and confirm it by
selecting “Yes”.
12. Select “Exit” to terminate the configuration. Answer
“Yes” to have your settings saved.
This concludes the configuration and loading processes for
the ISDN-Controller B1 v3.0 with the CAPI Manager.
The ISDN-Controller B1 v3.0 settings can be changed at any
time using this method.
10.6 Installing Additional ISDN-Controllers
with the CAPI Manager
To install additional ISDN-Controllers, enter:
load inetcfg
at the system console. Follow the instructions described in
the section “ISDN-Controller B1 v3.0 with CAPI for the CAPI
Manager” on page 67.
10.7 Removing the ISDN-Controller B1 v3.0
To remove the ISDN-Controller B1 v3.0 from Novell NetWare,
proceed as follows:
1.
Enter the following command at the system console:
load nwconfig
HB_B1V30.book Seite 68 Mittwoch, 7. Februar 2001 3:19 15