
Installing the Driver Software
18
ISDN-Controller B1 v3.0 – 3 Installation in Windows 2000
<CD-ROM drive>:\cardware\b1_v30\
windows.2k\english\setup.exe
4.
Confirm by clicking “OK”.
5.
The welcome screen of the installation program ap-
pears. To view additional information about the ISDN-
Controller and the installation routine, click the “Read
AVM Readme” button.
Click the “F1” key at any time to view help about the
current step of installation.
6.
Click “Next”.
7.
In the next window, activate the “Installation” option.
If the ISDN-Controller B1 v3.0 is already installed with
the drivers included on the Windows 2000 CD, select
the “Update” option here to install the latest version of
the driver software.
Click “Next”.
8.
Confirm the subsequent information window by clicking
“Next”.
9.
In the next step, you may be prompted to install soft-
ware without a digital signature by Microsoft.
Confirm such a request by clicking “Yes”.
10. Similarly, also answer the question which may be asked
about the AVM NDIS WAN CAPI Driver with “Yes”.
11.
Specify which D-channel protocol is used on your ISDN
line (DSS1, NI1, 5ESS or 1TR6).
Activate the desired option and then click “Next”.
12. Enter the desired multiple subscriber numbers in the
“ISDN multiple subscriber number (MSN)” window.
The settings performed here are valid only for the NDIS
WAN CAPI Driver (Internet, RAS over Dial-Up Network-
ing). If you work only with CAPI 2.0 applications, ignore
this setting, as the MSNs are configured in the individu-
al CAPI applications.
HB_B1V30.book Seite 18 Mittwoch, 7. Februar 2001 3:19 15