AVM B1 v3.0 Скачать руководство пользователя страница 27

Installation in Windows Millennium

ISDN-Controller B1 v3.0 – 5 Installation in Windows Millennium

27

5 Installation in Windows 

Millennium

For use in Microsoft Windows Millennium (Me), specially de-
veloped drivers are included with delivery. The driver archi-
tecture corresponds to the architecture of the Microsoft Win
32 Driver Model (WDM). This true 32-bit device driver offers
full support for all features of Microsoft Windows Me.

The CAPI 2.0 supplied with the controller supports both 16-
bit and 32-bit applications and, at the same time, applica-
tions in DOS windows. For more information about CAPI, see
the section “The Applications Interface CAPI 2.0” on
page 78.

The AVM ISDN-Controller B1 v3.0 is installed in Windows Me
in four main steps:

1.

Installing a new hardware device using the Windows Me
Hardware Wizard

2.

Configuring the controller

3.

Physically installing the controller

4.

Installing the driver software

The individual steps are described in detail below.

5.1 Installing the New Hardware Device

Do  not  physically  install  the  ISDN-Controller  hardware  in
your computer first.

Proceed as follows for installation:

1.

Open the “Add New Hardware” folder in the Control
Panel (“Start / Settings / Control Panel”).

The Windows Me Add New Hardware Wizard appears.
This wizard assists in the installation of new hardware
devices. Click “Next” to begin installation.

HB_B1V30.book  Seite 27  Mittwoch, 7. Februar 2001  3:19 15

Содержание B1 v3.0
















































































































Отзывы: