
Installation in Windows 3.x
ISDN-Controller B1 v3.0 – 8 Installation in Windows 3.x
49
8 Installation in Windows 3.x
For use in Microsoft Windows 3.x, specially developed driv-
ers are included with delivery. This 32-bit device driver (VxD)
exploits the possibilities of Windows’ “protected mode”.
The CAPI 2.0 supplied with the controller supports Windows
applications and applications in DOS windows at the same
time. For more information about CAPI, see the section “The
Applications Interface CAPI 2.0” on page 78.
It is not possible to load a DOS-based CAPI before Windows
is started. Use the DOS window or install the ISDN-Controller
in MS-DOS if you wish to use the controller with DOS applica-
tions.
8.1 Installing the Driver Software
Before beginning with the software installation, check that
the ISDN-Controller has been installed in the computer prop-
erly. Make sure that an I/O address available in the computer
is set on the ISDN-Controller (see the section “Setting the I/O
Address” on page 14).
Proceed as follows to install the driver software in Windows
3.x:
1.
Start Windows.
2.
Insert the “AVM ISDN-Controller B1 v3.0” CD in your CD-
ROM drive.
3.
From the “File” menu of the Program Manager, select
the “Run” command and enter the path to the installa-
tion program in the command line:
<CD-ROM DRIVE>:\CARDWARE\B1_v30\
WINDOWS.3XX\ENGLISH\SETUP.EXE
4.
Start the installation by clicking “OK”.
5.
The message “Initializing Setup...” appears. Once ini-
tialization is completed, the welcome screen of the in-
stallation program appears. Click “Next”.
HB_B1V30.book Seite 49 Mittwoch, 7. Februar 2001 3:19 15