AVM B1 v3.0 Скачать руководство пользователя страница 69

Страница: 69 / 111

Removing the ISDN-Controller B1 v3.0

ISDN-Controller B1 v3.0 – 10 Installation in Novell NetWare

The “Configuration Options” menu of the installation
program appears. Press “Return”.

Select the “Product options” item from the menu and
press “Return”.

If you are removing the ISDN-Controller from a NetWare
3.x server, a list of the programs already installed ap-
pears.

If you are removing the ISDN-Controller from a NetWare
4.x or 5.x server, a menu entitled “Other Installation
Items/Products” appears.

Select here the commands “View/Configure/Remove
installed products” and press “Return”. A list of the pro-
grams already installed is displayed.

Move the highlight to the AVM ISDN-Controller B1 v3.0
and press “Del”. Confirm with “Yes”.

Press “Esc” as often as necessary to close all sub-
menus and return to the “Configuration Options” menu.

This concludes the uninstallation of AVM ISDN-Controller
B1 v3.0 in Novell NetWare.

HB_B1V30.book Seite 69 Mittwoch, 7. Februar 2001 3:19 15

Содержание B1 v3.0
















































































































Результаты поиска

Содержание B1 v3.0

Отзывы:

AVM B1 v3.0, Руководство пользователя, Страница: 69 / 111

Результаты поиска

Содержание B1 v3.0

Отзывы: