
Changing the Settings
46
ISDN-Controller B1 v3.0 – 7 Installation in Windows 95
Unloading the ISDN-Controller
To unload the ISDN-Controller B1 v3.0, click “B1 Unload”. Af-
ter unloading, a message appears reporting that the AVM IS-
DN-Service is no longer available. Confirm this message by
clicking “OK”.
Loading the ISDN-Controller
The ISDN-Controller can be loaded manually by clicking the
“B1 Load” icon in the “AVM” program group. After loading
the following message appears:
Message after loading in Windows 95
7.6 Changing the Settings
After installation has been concluded, you have the option of
changing the following settings of the ISDN-Controller
B1 v3.0:
l
D-channel protocol
l
activate automatic data compression (CAPI SoftCom-
pression X75/V42bis)
Open the “B1 Setup” program from the “AVM” program
group and follow the instructions there.
Information about CAPI SoftCompression is available in the
section “CAPI SoftCompression X75/V42bis” on page 83.
HB_B1V30.book Seite 46 Mittwoch, 7. Februar 2001 3:19 15