
Starting Operation of the ISDN-Controller B1 v3.0
ISDN-Controller B1 v3.0 – 5 Installation in Windows Millennium
31
If the I/O address of the ISDN-Controller must be changed
after installation, because of a new hardware device, for in-
stance, open the Windows Me Device Manager by clicking
through “Settings / Control Panel / System”. Enter the new
value there.
After changing this setting, remove the ISDN-Controller
hardware from the computer and switch the jumper accord-
ingly. Windows Me administers the interrupt values auto-
matically.
5.5 Starting Operation of the ISDN-
Controller B1 v3.0
By default the controller is loaded automatically every time
Windows Me is started. Because the controller is loaded be-
fore the items in the “Startup” program group, it is no prob-
lem to include communications programs based on CAPI in
the “Startup” group.
If the ISDN-Controller B1 v3.0 is not to be loaded at all times,
use the options for manual loading and unloading.
Unloading the ISDN-Controller
To unload the ISDN-Controller B1 v3.0, click “B1 Unload”. Af-
ter unloading, a message appears reporting that the AVM IS-
DN-Service is no longer available. Confirm this message by
clicking “OK”.
HB_B1V30.book Seite 31 Mittwoch, 7. Februar 2001 3:19 15