
Changing the Settings
40
ISDN-Controller B1 v3.0 – 6 Installation in Windows 98
6.6 Changing the Settings
After installation has been concluded, you have the option of
changing the following settings of the ISDN-Controller
B1 v3.0:
l
D-channel protocol
l
activate automatic data compression (CAPI SoftCom-
pression X75/V42bis)
Open the “B1 Setup” program from the “AVM” program
group and follow the instructions there.
Information about CAPI SoftCompression is available in the
section “CAPI SoftCompression X75/V42bis” on page 83.
6.7 Installing Additional Controllers
Up to four active AVM ISDN-Controllers may be installed in
your computer at the same time. It is also possible to com-
bine active AVM ISDN-Controllers for ISA, PCI and USB buses
in one computer.
To install an additional AVM ISDN-Controller B1 v3.0, simply
repeat the entire installation procedure as described. Start
by installing a new hardware device. The installation pro-
gram automatically recognizes additional ISDN-Controllers
and, assisted by the Device manager, integrates them into
the system.
To add a PCI or USB controller, perform the installation as de-
scribed in the corresponding manual.
The drivers of all installed ISDN-Controllers are loaded auto-
matically when Windows is started.
HB_B1V30.book Seite 40 Mittwoch, 7. Februar 2001 3:19 15