
Starting Operation of the ISDN-Controller B1 v3.0
52
ISDN-Controller B1 v3.0 – 8 Installation in Windows 3.x
If the I/O address and interrupt of the ISDN-Controller must
be changed after installation, for instance, because new
hardware devices were installed, change the position of the
jumper on the ISDN-Controller first. Then open the program
“B1 Setup” and enter the new values there.
8.3 Starting Operation of the ISDN-
Controller B1 v3.0
By default the ISDN-Controller is loaded automatically every
time Windows is started.
If the ISDN-Controller B1 v3.0 is not to be loaded at all times,
use the options for manual loading and unloading.
Unloading the ISDN-Controller
To unload the ISDN-Controller B1 v3.0, click “B1 Unload”.
After unloading, a message appears reporting that CAPI is no
longer available.
Loading the ISDN-Controller
The ISDN-Controller can be loaded manually by clicking the
“B1 Load” icon in the “AVM” program group. After loading
the following message appears:
Message after loading in Windows 3.x
HB_B1V30.book Seite 52 Mittwoch, 7. Februar 2001 3:19 15