COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
581
Settings
Internal Telephone Numbers
Creating VoIP or IP DECT Subscribers
3. Enter a new internal number in the
from
entry field. Possible entries:
Note:
Double allocation of a number is not possible.
Using phone numbers with few digits (two or three-digit numbers) inevitably
restricts the possible supply of phone numbers with more digits. For
example, if the phone number 12 is assigned, the phone numbers 120-129
and 1200-1299 are no longer available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
For entering a sequence of phone numbers enter the first and the last phone
number under
from
...
until
.
4. Enter a name for identification purposes in the
Name
entry field.
Note:
The name is used for display purposes on the system telephone.
Furthermore, on some pages in the configuration manager (e.g., call data
list), the name is displayed in addition to the phone number.
5. In the
Module / Port
list field select
VoIP
.
6. In the
Device type
list field, select one of the following options, depending on the end
device connected:
Note:
Here you can already assign the MAC address and a provisioning file
to the subscriber. For more information see chapter Service and Maintenance
> Provisioning for IP Telephones.
2 to 4 digits in the range of
10
to
9999
COMfortel IP
: COMfortel 1200 IP, COMfortel 1400 IP, COMfortel 2600 IP,
COMfortel 3200, COMfortel 3500, COMfortel 3600 IP
COMfortel VoIP 2500 AB
: COMfortel VoIP 2500 AB
Standard VoIP telephone
: Standard VoIP end device (SIP) from other
manufacturers, soft phone (SIP)
Handset on COMfortel IP1040
: Handset (e.g., COMfortel DECT 900C) on a
COMfortel DECT IP1040 Base
Handset on COMfortel WS-IP
: Handset (e.g., COMfortel M-100/200/210/300/
310) on a COMfortel WS-400 IP or COMfortel WS-650 IP
