56
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Installation and Commissioning
Preparation (Modules)
Planning the System Configuration
Preparation (Modules)
Prior to the installation and commissioning of the device, you have to make some preparations.
This includes installing the PBX as a standing unit or mounting it on the wall and plugging in a
module (not contained in the scope of delivery). Moreover, the cover panel has to be removed
to perform installation jobs. The overviews of the modules provide information to facilitate
finding the various connection options.
Planning the System Configuration
1. Put some thought into what end devices types and how many of them you want to
connect to the system. Do the devices correspond to the proper use of the PBX?
2. Think about how many external call channels you need for smooth telephone
operation.
3. Determine the number of internal and external ports you need. Which models are
required? Does the number of ports and modules correspond to the proper use of the
PBX?
4. Locate a suitable location to mount the PBX. This should preferably be placed in the
immediate vicinity of the wall sockets of the network provider.
Base Circuit Board Overview
The following table shows the slots on the base circuitboard of the COMpact 5000/R.
Explanation of column headers: