COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
579
Settings
Internal Telephone Numbers
Creating ISDN Subscribers
If a COMfortel DECT 900 Base is on the internal S
0
port, no further end
devices can be run on this port due to output limitations.
A maximum of five phone numbers can be allocated on a COMfortel DECT
900 Base for the mobile handsets (three are recommended).
Proceed as follows:
•
Using the configuration manager
Requirements:
•
Internal S
0
port (optional, see chapter Important Information > Product Details > Basic
Assembly and Extensions)
1. Open the page
Subscriber (scr.) > Phone numbers
.
2. Click
New
.
3. Enter a new internal number in the
from
entry field. Possible entries:
Note:
Double allocation of a number is not possible.
Using phone numbers with few digits (two or three-digit numbers) inevitably
restricts the possible supply of phone numbers with more digits. For
example, if the phone number 12 is assigned, the phone numbers 120-129
and 1200-1299 are no longer available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
For entering a sequence of phone numbers enter the first and the last phone
number under
from
...
until
.
4. Enter a name for identification purposes in the
Name
entry field.
Note:
The name is used for display purposes on the system telephone.
Furthermore, on some pages in the configuration manager (e.g., call data
list), the name is displayed in addition to the phone number.
5. In the
Module / Port
list fields, select the module and the port to which the end device
is connected.
2 to 4 digits in the range of
10
to
9999
