manualshive.com logo in svg

Agilent Technologies J-BERT N4903, Руководство пользователя

Поделиться
Скачать
Agilent Technologies J-BERT N4903 Скачать руководство пользователя страница 422

To save the setup with a new filename or directory path, do the
following:

•

In the 

File

 menu, click 

Save

 and then 

Save Instrument State As

.... This

opens a dialog box, which allows you to create subdirectories,
rename setup files, or overwrite existing setup files.

N O T E

Ensure your instrument state files have the extension, *.btz. If you do not specify
an extension or use a different extension, the instrument may not recognize the file
as an instrument state file.

N O T E

The default pathname for user defined instrument states is 

C:\N4903A\Settings

The number of instrument states you can save is limited only by the
available space on the internal hard disk or floppy disk. Each
instrument state uses approximately 6 kB of disk space.

T I P

Remember to always make a backup copy of your files. If your original files are
damaged or lost, you can restore the files from the backup copy.

Recalling Instrument States

Recalling the instrument state restores all the setup parameters for the
instrument hardware and software.

To recall the setup, do the following:

•

In the 

File

 menu, click 

Open

 and then 

Open Instrument State

.... This

opens a dialog box which allows you to select the setup file you want
to recall.

T I P

Remember always to make a backup copy your setup files. If your original files are
damaged or lost, you can restore the files from your backup copy.

N O T E

The default pathname for user defined instrument states is 

C:\N4903A\Settings

9

Customizing the Instrument

422

Agilent J-BERT N4903 High-Performance Serial BERT

Содержание J-BERT N4903



















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды