Advanced Instruments OsmoPRO Скачать руководство пользователя страница 89

Страница: 89 / 99

Appendix E:

OsmoPRO MAX LIS Specification

OsmoPRO MAX Automated Osmometer User Guide

E.5 Sample Information Record

The fields used in this record are as specified in LIS2-A2:

7.1

Record type ID—

identifies the record as a

sample information record.

7.2

Sequence number—Sequence number (integer)
of the sample record within the message.

7.3

Practice-assigned ID (optional)—Text field
containing the unique sample ID assigned by the
practice.

7.4

Laboratory-assigned ID (optional)—Text field
containing a unique sample ID assigned by the
laboratory.

Example

P|1|PracticeID|LabID<CR><ETX>

Test Order Record

The fields used in this record are as specified in LIS2-A2:

8.4.1

Record type ID—

identifies the record as a test

order record.

8.4.2

Sequence number—Number (integer) of the

order record for the sample.

8.4.3

Specimen ID (optional, UTF8-encoded)—Text

field containing the unique specimen ID assigned
by the LIS.

If no

instrument specimen ID

(8.4.4) is specified,

the specimen ID

must

be specified.

8.4.4

Instrument specimen ID (optional)—Text field

containing the unique specimen ID assigned by
the instrument either from reading a barcode or
as entered by an operator.

If no

specimen ID

(8.4.3) is specified, the

instrument specimen ID

must

be specified.

8.4.5

Universal test ID—Text field containing up to four

parts describing the test. This code is always the
four-letter code

OSMO

for the instrument.

8.4.6

Priority flag (optional)—Single character field

indicating the priority of the test. The only codes
recognized by the instrument are

for STAT and

for routine (default).

8.4.7

Requested/ordered date and time (optional)—

Text field containing the date/time of the order. If
the date/time is in the future, the system does
not look for the specimen until after that date/
time.

8.4.8

Specimen collection date and time (optional)—

Text field indicating the date/time that the
specimen was collected.

8.4.10

Collection volume (optional)—Text field indicating

the volume of the specimen. If no unit is specified
(with a component delimiter), the unit defaults to
milliliters.

8.4.11

Collector ID (optional)—Text field indicating the

ID of the specimen collector.

8.4.12

Action code (optional)—Single character

indicating the action to be taken when the order
is received. See the definition of the codes in the
LIS2-A2 document.

8.4.15

Date and time specimen received (optional)—Text

field indicating the date/time of receiving the
order.

8.4.16

Specimen descriptor (optional)—Text field

indicating the type of the specimen.

8.4.17

Ordering physician (optional)—Text field

indicating the name of the ordering physician.
Parts of the name should be separated with
component delimiters rather than space
characters.

8.4.18

Physician’s telephone number (optional)—Text

field indicating the telephone number of the
ordering physician.

8.4.19

User field number 1 (optional)—Text field sent by

the requester and returned with the response.

8.4.21

Laboratory field number 1—Text field definable for

any use by the laboratory. This field is optional.

8.4.23

Date and time results reported—Text field

indicating the date/time that the order was
reported back with the result. The instrument
always includes this field in reports sent to the
LIS.

8.4.26

Report type (optional)— Single character

specifying the type of the report. See the
definition of the codes in the LIS2-A2 document.

Содержание OsmoPRO




































































































Результаты поиска

Содержание OsmoPRO

Отзывы:

Бренды по названию

Популярные бренды

Advanced Instruments OsmoPRO, Руководство пользователя

Результаты поиска

Содержание OsmoPRO

Отзывы:

Бренды по названию

Популярные бренды