Chapter 2:
Installation and Setup
OsmoPRO MAX Automated Osmometer User Guide
31
4.
Press
Save
.
5.
Press
Exit
to return to the Settings menu.
6.
When Badge Scan mode is enabled, users can log in
to the system when prompted by scanning a badge
on the front barcode scanner.
CAUTION:
The front barcode
scanner uses a Class 2 laser.
Do not stare directly into the
beam when scanning barcodes.
Set Up User Accounts
Adding a User
1.
Press
> Settings >Users
and log in to the
Admin
account (see
Logging in to the Admin User Account
).
2.
Press
Add
to open the
Add New User
screen.
3.
Press
next to the
ID
field.
4.
Type the ID and press
Enter
.
5.
Enter the
Password
and
Access Level
in one of these
ways:
If Badge Scan Mode is
enabled
(see
CAUTION:
The front barcode
scanner uses a Class 2 laser.
Do not stare directly into the
beam when scanning barcodes.
a.
Scan your badge using the front barcode reader by
aligning the barcode with the barcode laser.
b.
The system sounds a tone when the badge has
been read and automatically fills in the password.
c.
Select a user
Access
Level
.
If Badge Scan Mode is
not
enabled
:
a.
Press
next to the
Password
field.
b.
Type the password and press
Enter
.
c.
Retype the same password to verify and press
Enter
.
d.
Select a user
Access
Level
.
