Chapter 8:
Instrument Maintenance
OsmoPRO MAX Automated Osmometer User Guide
67
3.
Select the
Advanced Instruments Preventative
Maintenance
checkbox to record the maintenance
event.
4.
Press
to enter the
Advanced Instruments trained
service engineer name
(required) who performed the
maintenance.
5.
Press
Edit
to type a
Comment
(required - up to 1024
characters) to enter a full explanation of the
maintenance performed.
6.
Press
Save
.
The instrument saves the preventative maintenance
information to the events database.
The instrument will display prompts starting 11 months
after this preventative maintenance date as a
reminder that the next recommended maintenance is
due.
7.
Press
Exit
to return to the Diagnostics menu.
Logging Repair Information (Administrators only)
Supervisor-level users can record when an instrument is
repaired and the service engineer performing the repair
by completing the following steps.
1.
Press
> Diagnostics > Maintenance
and log in.
2.
Press the
Repairs
tab.
3.
Press
to enter the
Advanced Instruments trained
service engineer name
(required) who repaired the
instrument.
4.
Press
Edit
to type a
Comment
(required - up to 1024
characters) to explain the repair(s) performed.
5.
Press
Save
.
6.
Press
Exit
to return to the Diagnostics menu.
8.7 Performing a System Update
NOTE:
Make sure you must have the USB drive
containing system update files.
1.
Insert a USB drive into a USB port on the instrument.
2.
Select
> Settings > System Update
and log in.
3.
Select the type of update to perform:
Software
,
Motor
Board,
or
Osmometer Board
.
4.
Press
Start
and wait while the system performs the
update.
A progress bar indicates the update progress.
5.
When the update is finished, press
Exit
to return to
the Settings menu.
6.
Power off the OsmoPRO MAX and wait 15 seconds.
This step is required for the system update to take
effect.
7.
Power on the instrument.
