manualshive.com logo in svg

Advanced Instruments OsmoPRO, Руководство пользователя

Поделиться
Скачать
Advanced Instruments OsmoPRO Скачать руководство пользователя страница 74

OsmoPRO MAX Automated Osmometer User Guide

74

For assistance with service procedures, contact Technical 
Service (see 

Contacting Advanced Instruments

). Have 

the model and serial number available when you speak 
to a technician.

If you need to send your Instrument for servicing, a 
Technical Service representative will provide you with an 
RMA number. Units are not accepted for service without 
an RMA number.

CAUTION: 

Do not open or remove the instrument covers 

unless you are advised to do so by a service 
engineer. 

If you are advised to open or remove 

the instrument covers, always unplug the 
power cord first to avoid exposure to electric 
shock, excessive temperatures, or mechanical 
hazards.

10.1  Who Should Perform Service?

Instrument operators should not attempt any service or 
maintenance procedure that is not explained in this user 
guide.

Only service technicians trained by Advanced 
Instruments should perform service or maintenance 
procedures that are not included in this user guide.

10.2  Issues that Require a Service Technician

If the product requires service for any of the following 
reasons, unplug the product from the electrical outlet 
and refer service to a qualified service technician:

• 

The power cord, extension cord, power strip, or power 
input module is damaged.

• 

Liquid has spilled into the interior of the product.

• 

A foreign object has fallen into the product.

• 

The product has been dropped or damaged by a 
falling object.

• 

There are noticeable signs of overheating or a burning 
odor.

• 

The product does not operate normally when you 
follow the operating procedures.

• 

The main supply fuse(s) or any internal fuse(s) 
continually fail.

• 

ESD precautions

• 

The motors and/or front barcode scanner need 
realignment

A discharge of static electricity from contact with the 
human body or other conductor can damage system 
boards or static-sensitive devices. Never perform internal 
maintenance without following recommended 
electrostatic discharge (ESD) protection procedures.

IMPORTANT: 

Annual preventative maintenance by an 

Advanced Instruments-trained service engineer is 
strongly recommended to ensure optimal performance 
and maximize the life of the instrument.

Chapter 10: 

Troubleshooting

Содержание OsmoPRO




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды